Tabla de contenido
Publicidad
2. Installation and Pre Operation
2.1 Installation
The Food Processor must be placed onto a leveled stable surface
approximately 850mm high, and with the outlet of processed products
turned to a collector recipient, in order to ease the removal of processed
food.
Make sure you are connecting the equipment to the right voltage
(110V or 220V). Check the machine voltage on the attention label,
attached to the machine power cord.
The power cord plug has 2 (two) flat pins and a round pin (ground
wire). All the 3 (three) pins must be properly connected before switching
the equipment on.
Picture - 03
2.2 Pre Operation
First check if the Food Processor is firm on its position. Before using
it, it is mandatory to wash all the discs and grid discs with hot water and
neutral soap, rinse and dry them before placing them on the machine.
2.3 Choosing the discs
As optional parts, there is a complete range of discs and grid discs,
which are used to process a wide variety of vegetables and fruit.
05
Housing
Power cord with ground wire
Stable working surface
Maximum Height= 850mm
Publicidad
Tabla de contenido
