Tabla de contenido
Publicidad
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
CAUTION: BEFORE USING THE POWERTOOL READ THIS MANUAL CAREFULLY AND KEEP IT FOR FUTURE
REFERENCE.
●
Use hearing protection when operating the device. Noise hazards may cause hearing loss.
●
Use additional handles supplied with the power tool. Loss of control may cause operator personal injury.
●
Do not change direction of spindle rotation when the tool is operating. Otherwise the power tool may
get damaged.
ADDITIONAL RULES FOR SAFE OPERATION OF DRILL
●
Use only recommended battery and charger.
●
Keep the battery away from heat sources. Do not leave the battery for a long time in high temperature (in
direct sunlight, in proximity of heaters and wherever the temperature exceeds 50°C).
●
The battery charging time cannot be longer than 8 hours, otherwise the battery may be damaged.
●
Avoid charging the battery in temperatures lower than 0°C.
●
Charger supplied with the drill is designed for operation with this product only. Do not use it for other
purposes.
●
Do not put any metal objects into the charger.
●
Do not change direction of spindle rotation when the tool is operating. Otherwise drill may be damaged.
●
To clean the drill use soft, dry cloth. Never use detergents or alcohol.
●
Disconnect charger from power supply before cleaning.
●
If you plan to charge more than one battery successively, make a 30 minute break between chargings.
●
Recharge the battery only after it is fully discharged.
●
Do not recharge the battery after short use of the drill.
SPECIAL CONDITIONS REGARDING SAFETY OF CHARGER OPERATION
●
Keep this manual. It contains important safety rules and rules for charger use.
●
Before using the charger read all relevant information contained within this manual, see markings on the
charger and the product it is designed for.
●
To reduce the risk of potential personal injury use the charger for nickel-cadmium batteries only. Other
type batteries may explode and cause personal injury or material damages.
●
Do not expose the charger to moisture or water.
●
Use of any connecting elements not supplied or not recommended by the manufacturer of the charger
may cause fire, personal injury or electric shock.
●
Make sure the power cord is not located in pathway, it is not exposed to treading or other danger (e.g.
strong tension).
●
Do not use extension cord unless it is absolutely necessary. Use of improper extension cord may cause
fire or electric shock. If it is necessary to use extension cord, first make sure that:
-
Extension cord socket matches plug prongs of the original charger power cord.
-
Extension cord is in good technical condition.
●
Do not use the charger with damaged cord or plug. Damage should be repaired by a qualified person.
●
Do not use the charger after it has been hit, dropped or otherwise damaged. Entrust the testing and
potential repair to authorized service workshop.
●
Do not try to dismantle the charger. All repairs are to be made by an authorized service workshop.
Improper charger assembly may cause electric shock or fire.
●
Disconnect the charger from a power supply before starting any maintenance or cleaning.
●
When the charger is not in use, it should be disconnected from the power network.
CORDLESS DRILL
58G127
DETAILED SAFETY REGULATIONS
12
Publicidad
Tabla de contenido
