Broan best K3500 Manual Del Usuario página 6

All manuals and user guides at all-guides.com
MOUNT THE PLATE
MOUNTING
SCREWS
Mount the plate of the electrical system
(3.9x9.5mm)
attaching it with 3 screws (3.9x9.5mm).
PLATE OF
THE
ELECTRICAL
SYSTEM
WIRING
Note: This range hood must be properly
grounded. The unit should be installed by a
qualified electrician in accordance with all
applicable national and local electrical
codes.
GROUNDING INSTRUCTIONS
This appliance must be grounded. In the
event of an electrical short circuit, grounding
reduces the risk of electric shock by
providing an escape wire for the electric
current. This appliance is equipped with a
cord having a grounding wire with a
grounding plug. The plug must be plugged into an outlet that is properly installed
and grounded.
WARNING - Improper grounding can result in a risk of electric shock.
Consult a qualified electrician if the grounding instructions are not completely
understood, or if doubt exists as to whether the appliance is properly grounded.
Do not use an extension cord. If the power supply cord is too short, have a qualified
electrician install an outlet near the appliance.
Set the electrical power supply within the space covered by the decorative flues.
Position the power socket at a maximum distance of 33-7/16" (85 cm) from where the
lead exits from the hood (see illustration alongside). Make sure this does not inter-
fere with the bracket fastening area or with the decorative flue (where the flue touches
the wall).
Fit the plug into the power socket.
- 6 -