Plein Air TV-SL Manual De Instrucciones página 12

INSTRUCTIONS FOR USE
1. Connect the plug to the mains socket
2. Set the ignition knob to the desired position. The switch can be
set to 4 different positions.
3. Select the desired power: turning the ignition knob clockwise to
position "I", the heater will turn on at 1000W power. If
maximum power 2000W is desired, turn the switch to position
"II".
4. To unplug the appliance, turn the switch to position "0".
USE OF THE ENVIRONMENT THERMOSTAT MODE
This model is also equipped with a device – the Environment Thermostat – which, once the desired ambient
temperature has been set, controls and keeps such temperature until a new value is set.
To use this mode:
 Turn the thermostat knob to the maximum position.
 Turn the ignition knob until the 2000W power position.
 Wait for the environment to reach the desired temperature.
 Slowly turn the thermostat knob until turning off the appliance, which is indicated through the thermostat
tripping.
 In this way, the temperature will be automatically adjusted and kept constant along time by the thermostat,
which will automatically activate the appliance when the ambient temperature falls below the desired
temperature.
USE OF THE SUMMER VENTILATION MODE
Set the selector to the Summer Ventilation
used during summer.
SAFETY MEASURES
To avoid damages and dangerous situations caused by overheating, the fan heater is equipped with a safety
device that stops its operation in case of overheating, for example, due to a total or partial obstruction of the
grills. In this case, disconnect the appliance from the mains socket, wait for around 30 minutes so that it cools
down, and remove the object that is obstructing the grills. At this point, it is possible to start the appliance
again, as described above. The appliance should operate correctly. Should the problem come up again, contact
the nearest support center.
MAINTENANCE
1. This appliance requires no maintenance except cleaning of its external surfaces.
2. Before cleaning the appliance, disconnect it from the mains socket and wait for it to cool down.
3. Dust the intake grill regularly, removing rope yarn, down or any other foreign matter that might limit
regular air circulation.
4 . To clean external surfaces, use only a soft moistened cloth. Do not use solvents.
4 .
5. Do not throw the box, use it to store the equipment.
6. When you don't use the appliance, store it in its original packaging and store in a dry place.
Model: TV-SL
Item
Heat output
Nominal heat output
Minimum heat
output (indicative)
Maximum
continuous heat
output
Auxiliary electricity
consumption
At nominal heat
DT Istr. (TV-SL)_06/2018_Rev.0_06/18
Symbol Value Unit
P kW
2.0
nom.
P 1.0 kW
min.
P 2.0 kW
max,c
el N/A kW
max
mode to turn the appliance into a practical fan that can also be
Type of heat input, for electric storage local space
heaters only (select one)
manual heat charge control, with integrated
thermostat
manual heat charge control with room and/or
outdoor temperature feedback
electronic heat charge control with room and/or
outdoor temperature feedback
fan assisted heat output
Type of heat output/room temperature control (select
POSITION
0 Off
Summer ventilation
I 1000W power
II 2000W power
Item
TV-SL
MODE
Unit
NO
NO
NO
NO
12/22