Publicidad
Idiomas disponibles
Idiomas disponibles
Time setting (switching off delay):
Function test:
Ensure that the motion detector is not obscured. Ensure that the coverage area is not restricted by items such as
through large furniture. To set the detection range and the daylight test, turn the knobs to the positions shown. The
motion detector is activated after a warm-up phase of approx. 30s. If no further movement takes place in the
sensing area of the sensor, the sensor switches off.
Technical Data:
Operating voltage:
Maximum power consumption:
Consumption in standby:
Electrical protection:
Protection class:
Detection moving speed:
Ambient temperature:
Humidity:
Possibilities of adjustments:
Detection area:
Sensitivity when switching (with regard to
the ambient brightness):
Time setting (switching off delay):
Disposal note:
This product may not be disposed of with household waste. At the end of its useful life, the product must be
returned to a point of acceptance for the recycling of electric and electronic device. Please ask your local
municipality for the point of acceptance! As the devices contain valuable recyclable materials, they should be sent
for recycling, in order not to harm the environment or human health from uncontrolled waste disposal.
The duration of the operating time can be set continuously from approx. 10s to
15min. The timer is restarted if a movement from the sensor is detected before the
set time has elapsed.
220 -240V AC 50/60Hz
Max. 1.200W
Max. 600W
< 0,5W
IP65
II
0,6-1,5m/s
-20° - +40°C
<93%
Max. 12m (<24°C) 180°
Max. 3m (<24°C) 360°
<3-2.000LUX
Min. 10s +/- 3s - Max. 15min +/-2min
10
Publicidad
