Agilent Technologies TV 1001 SEM Manual De Instrucciones página 243

Tabla de contenido

Publicidad

The Macrotorr stages are in the form of four discs.
The turbine rotor is supported by permanently lubricated high precision
ceramic ball bearings in-stalled on the forevacuum side of the pump. The static
blades of the stator are made of stainless steel. These are supported and
accurately po-sitioned by spacer rings.
The Macrotorr stators are in the form of self-positioning machined discs with
pumping channels and an opening restricted by the corresponding rotor discs.
These are made of aluminium alloy.
The pump can be water cooled or air cooled: in the first case the customer can
use the dedicated channels on the pump body, in the second case an external
optional fan is available.
A thermistor sensor is mounted near the upper bearing to prevent the pump
from overheating.
The pump is balanced after assembly with a residual vibration amplitude,
measured at the pump's envelope, less than 350 mm/sec
The pump can operate in any position and can be supported on the high
vacuum flange. The connection of the forevacuum on the side of the pump is a
KF 40 NW flange for the models 7698931 and 8698946, a KF 25 NW flange for
the model 8698932.
TV 1001 SEM User Manual / 87-900-973-01 (H)
1st stage with a blade angle of 40°,
2nd stage with a blade angle of 34°,
3rd stage with a blade angle of 28°,
4th and 5th stages with a blade angle of 24°,
6th stage with a blade angle of 20°,
7th and 8th stages with a blade angle of 16°.
Technical Information
Description of the TV 1001 SEM
17
2
.
243/296

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

7698931869893286989469698978

Tabla de contenido