Start-Up For Cooking And Loading/Unloading Products; Deactivation - MBM EFTA 911 L Instrucciones Para El Funcionamiento

OPERATInG InSTRUCTIOnS
Start-up for cooking
unloading products
Before proceeding with these operations, see "Daily
activation".
When loading the product into the appliance and
unloading it, there is a residual risk of being burnt; this
risk can occur coming into unintentional contact with:
hob - cooking cavity - recipients or material processed.
Whenever you access the areas called "Hob" and/or
"Cooking cavity", always remember that the danger
of being burnt persists.
Take appropriate measures for personal protection.
Wear protective equipment suitable for the operations
to be performed.
During the heat-up phase, lubricate the hotplate with
vegetable oil in order to facilitate cooking operations.
The entire surface of the hotplate heats up.
When cooking is over, remove the item from the
appliance using the specific cookware.
•
Ignition (Figure 1-2)
Turn the thermostat knob to the desired position (fig. 1). The
indicator lights "G" and "H" indicate an operating phase.
Green indicator light: The indicator is subordinated to use
of the switch-on knob. lighting of the indicator signals the
operating phase.
yellow indicator light: The indicator is subordinated to use
of the thermostat knob. lighting of the indicator signals the
heating phase.
Place the item to be cooked onto the hob with the hotplate
heated up (fig. 2).
When the cooking is over, remove the item from the hotplate
and place it in a place prepared beforehand.

Deactivation

At the end of the work cycle, turn the knob to "zero" (fig. 3).
The light indicators must stay off.
The appliance must be cleaned regularly and every
incrustation or food deposit removed. See chapter:
"Cleaning instructions"
THE PRESENT MANUAL IS PROPERT Y OF THE MANUFACTURER. ANY REPRODUCTION, EVEN PARTIAL, IS PROHIBITED.
and loading/
- 33 - 33
Fig. 3
Fig. 1
Fig. 2