Product Overview - YATO YT-82173 Manual Original

PRODUCT OVERVIEW

The mitre saw is a versatile tool designed for cutting wood and wood-based materials. Thanks to the wide range of adjustment
options, straight and angular cutting is possible. The correct, reliable and safe operation of the appliance depends on its proper
use therefore:
Read and keep the entire Manual before the fi rst use of the tool.
The tool supplier shall not be liable for any damage resulting from failure to comply with the safety instructions and recommen-
dations specifi ed in this manual.
ACCESSORIES
The factory packaging should contain:
- the mitre saw,
- the dust bag,
- the circular saw,
- the work table extensions,
- the work table clamp,
- the work table locking screw.
SPECIFICATION
Parameter
Catalogue No.
Rated voltage
Rated frequency
Rated power
Rated speed
Max. height x max. cutting length
horizontal rotation angle 0 O / tilt angle 0
horizontal rotation angle 45 / tilt angle 0
O
horizontal rotation angle 0 / tilt angle 45
O
horizontal rotation angle 45 / tilt angle 45
O
Circular saw: outer diam. x fi xing diam. x max. thickness
Minimum workpiece dimensions: height x length x thickness
Maximum bevel cutting angle
Weight
Noise level
- Sound Pressure L ± K
pA
- power L ± K
wA
Protection class
Ingress protection rating
Laser pointer
- class
- power
- wavelength
The declared noise emission values have been measured using the standard test method and can be used to compare one tool
to another. The declared noise emission values can also be used for preliminary exposure assessment.
Warning! Noise emissions during the correct operation of a power tool may diff er from the declared values depending on the
manner in which the tool is used, in particular the type of the workpiece.
Warning! Operator protection measures must be determined based on an approximation of exposure under current conditions
of use. All stages of the work cycle must be taken into account. In addition to the working time, other factors must be taken into
account, such as the time when the tool is switched off and when it is idle.
GENERAL WARNINGS FOR THE SAFETY OF POWER TOOLS
Warning! Read all safety warnings, illustrations and specifi cations provided with this power tool. Failure to do so may
result in electric shock, fi re or serious injury.
16
O
O
O
O
O R I G I N A L
GB
Units
[V~]
[Hz]
[W]
[min -1 ]
[mm]
[mm]
[mm]
[mm]
[mm]
[mm]
[ O ]
[kg]
[dB(A)]
[dB(A)]
[mW]
[mm]
I N S T R U C T I O N S
Value
YT-82173
220 – 240
50
1800
5000
70 x 305
70 x 210
35 x 305
35 x 210
255 x 30 x 3,0
20 x 200 x 20
45
9.8
94,3 ± 3,0
107,3 ± 3,0
II
IP20
2
<1
650