Tabla de contenido
Publicidad
ENGLISH
STEP 3 – SIDE OF THE HEAD
•
With the comb set at 3 mm or 6 mm, trim sideburns. Then change to the longer 9 mm
guide comb and continue to cut the top of the head.
STEP 4 – TOP OF THE HEAD
•
Use the longer length comb attachment and set it to 24 mm or 27 mm then cut hair on
top of the head against the direction in which the hair normally grows.
•
For longer hair on top, use the longer length comb attachment (25 – 35 mm) to achieve
the desired style.
•
Always work from the back of the head.
STEP 5 – THE FINISHING TOUCHES
•
Use the clipper without an attachment comb for close trimming around the base and
sides of the neck.
•
To produce a clean straight line at the sideburns, reverse the hair clipper.
•
Place the reversed clipper at right angles to the head, tips of the blades lightly touching
the skin and then work downwards.
CARE FOR YOUR HAIRCLIPPER
•
Your clipper is fitted with high quality blades.
•
To ensure long lasting performance of your clipper, clean the blades and unit regularly.
•
Always keep the attachment guide comb on the trimmer blade.
AFTER EACH USE
•
Ensure the appliance is switched off and
•
Brush the accumulated hair from the blades and body of the clipper. Do not submerge
the clipper in water.
•
To clean unit, wipe with a damp cloth and dry immediately.
•
Place a few drops of cutter or sewing machine oil onto the blades. Wipe off excess oil.
WASHABLE BLADE CLEANING
•
The blades are washable under a running tap but must be removed before they are
cleaned in this way. Keep the body of the device dry at all times.
•
To remove the blades ensure the unit is switched off. Push the blade set away from the
clipper body using your thumb (Fig A).
•
To reattach once the blades are cleaned and dry, align the bottom of the blade with the
bottom blade housing tab and
CLEANING CAUTIONS
•
Do not use harsh or corrosive cleaners on the units or their blades.
•
Ensure the appliance is switched off and unplug from the main outlet before cleaning.
6
unplugged from the charger before cleaning.
slide the cartridge back into place until you hear a click.
Publicidad
Tabla de contenido
