Grammer MSG93 Manual De Instrucciones página 19

•
To prevent injury,
seat.
•
removed from the seat cushion and the backrest upholstery.
•
To eliminate any risk of accident, the settings must be checked to ensure they are
correctly engaged
•
Adjustments must
•
example held in place, before the backrest adjuster is operated. If you fail to do so, there
is a danger that the backrest frame may jerk forward and
•
original
•
During the removal and installation of the driver's seat, the corresponding instructions by
the specific vehicle manufacturer must be strictly observed!
•
Do not hold onto the covers for lifting the driver's seats. If you do so anyway, there is an
•
Before you remove the driver's seat, disconnect all plug-in connections between the seat
and the vehicle supply network. When you replace the plug-in connectors, make sure they
are tight (dust, water).
•
Seatbelts can be retrofitted to the driver's seat. Seatbelts
area.
Seatbelts must be fitted in accordance with specific national regulations and guidelines,
and must be approved by
•
Retrofitted seatbelts must be fastened
Where seatbelts are fitted to the driver's seat, the
checked
•
Fasteners must be
loose bolts or other faults.
•
If you notice that the seat does not function correctly (for example a defective seat
suspension; improper curvature of the lumbar support or damaged bellows),
If you fail to do so, your health may be affected and the
GB
of the driver's seat, possible
be made
parts) may impair the safety standard to which it has been tested.
, threatening your
must be approved by
, as they increase the load in the seat mounting
.
after an accident.
by specialist personnel after an accident has occurred.
to arrange for repairs to be carried out.
Safety instructions
.
.
, the backrest frame must be supported, for
(for example fitting parts which are not
. For this reason,
.
.
and
. If the seat wobbles there may be
of the driver's
has to be
.
.
must be
.
19