Weather Forecast - BALDR B0340WST2H2R-V7 Manual Del Usuario

4. Arrow indication for temperature changes:
will display when the reading increase by 1℃ within one hour
or compared with last reading.
will display when the reading decrease by 1℃ within one
hour or compared with last reading.
5. Accuracy: For temperature between 0℃~50℃,the accuracy is
±1 ℃,if out of this range the accuracy will be ±2℃; Temperature
resolution is 0.1 ℃(0.1℉).
6. Press " RCC/SET " button to select the temperature unit ℃/℉
(Refer to Manual Settings point 13).
HUMIDITY
1. After power on ,the indoor humidity will display automatically, it
will update reading each 30 seconds and start to receive
outdoor signal which lasts for max 3 minutes.
2. Humidity display range: 1%-99%;for humidity lower than 1%,the
reading will be "1%";for humidity higher than 99%,the reading
will be "99%".
3. Accuracy: when the humidity is between 30-80%,the accuracy is
± 5%,if out of this range the accuracy will be ±7%.
4. Arrow indication for humidity changes:
will display when the reading increase by 3% RH within one
hour or compared with last reading.
will display when the reading decrease by 3% RH within one
hour or compared with last reading.
5. Humidity resolution:1% .
Tips: The reading will be more accurate if it is placed at the same
position for half an hour after power on.

WEATHER FORECAST

●
The weather forecast icon will show after power on. There are 5
kinds of weather modes: Sunny, Sunny To Cloudy, Cloudy,
Rainy, Snow. The weather icon displays are based on the hourly
calculation of indoor/outdoor temperature & humidity and barom-
eter data. The forecast is for next 12 hours with 70%-75%
accuracy after 48 hours of data accumulation .
11