ASROCK H170M Pro4 Manual De Instrucciones página 6

* here are two LEDs on each LAN port. Please refer to the table below for the LAN port LED indications.
ACT/LINK LED
SPEED LED
LAN Port
Activity / Link LED
Status
Of
Blinking
On
** If you use a 2-channel speaker, please connect the speaker's plug into "Front Speaker Jack". See the table below
for connection details in accordance with the type of speaker you use.
Audio Output
Channels
2
4
6
8
To enable Multi-Streaming, you need to connect a front panel audio cable to the front
panel audio header. Ater restarting your computer, you will ind the "Mixer" tool
on your system. Please select "Mixer ToolBox"
streaming", and click "ok". Choose "2CH", "4CH", "6CH", or "8CH" and then you are
allowed to select "Realtek HDA Primary output" to use the Rear Speaker, Central/
Bass, and Front Speaker, or select "Realtek HDA Audio 2nd output" to use the front
panel audio.
4
Description
No Link
Data Activity
Link
Front Speaker Rear Speaker
(No. 7) (No. 5)
V
V
V
V
Speed LED
Status Description
Of 10Mbps connection
Orange 100Mbps connection
Green 1Gbps connection
Central / Bass
(No. 9)
-- --
V --
V V
V V
, click "Enable playback multi-
Line In
(No. 6)
--
--
--
V