Descargar Imprimir esta página

Russell Hobbs 22281-56 Instrucciones página 4

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 24
11. Turn the body till the tube is vertical.
12. Now turn it 45° clockwise, to engage the bayonet fittings inside the motor unit.
13. Turn it 45° anti-clockwise, to lock it in place.
14. Fit the cap to the pusher, and drop the pusher into the tube.
USING
Don't run the motor continuously for more than 2 minutes, it may overheat. After 2 minutes
switch off for at least 2 minutes, to recover.
1.
Cut the food to a shape that will go down the tube (48x40mm).
2.
Put the plug into the power socket.
Move the switch to I.
3.
4.
Remove the pusher, and drop the ingredients down the tube.
5.
Replace the pusher, and use it to push the ingredients gently down the tube.
DISASSEMBLY
1.
Switch the appliance off (O) and unplug it.
2.
Turn the body 45° clockwise, to disengage the bayonet fittings, and pull it off the motor
unit.
3.
Turn the ring nut 45° clockwise.
4.
Lift it off the body.
5.
Push the rear of the cutter mount towards the body, then tip the cutter mount out.
6.
Stand the cutter mount upright on the work surface.
7.
Press the tab on the narrow end of the cutter towards the wide end of the cutter mount, to
release it from the cutter mount, then lift the cutter out.
8.
Rotate the cutter mount, then remove the second cutter.
STORAGE
You may store the cutters in the guides inside the pusher. Insert them with the narrow end
down.
NOISE
If you find the appliance is noisy, the cutter may be rubbing against the ring nut.
Applying a little cooking oil to the inside of the ring nut before use should fix this.
HOW IT WORKS
It makes a semi-solid dessert using frozen banana as the structural material, mixed with
frozen fruits to provide the flavouring. The frozen fruit is mashed to provide a sweet dessert with
a consistency similar to ice cream, but with no added fat, and no added sugar.
ASSEMBLY
1.
Switch the appliance off (O) and unplug it.
2.
Push the shaft into the body.
3.
Screw the nozzle on to the threaded end of the body. It's a left hand thread, so it screws on
anticlockwise. It should be finger tight – do not use the spanner.
4.
Turn the body till the tube is vertical.
5.
Now turn it 45° clockwise, to engage the bayonet fittings inside the motor unit.
6.
Turn it 45° anti-clockwise, to lock it in place.
7.
Drop the pusher into the tube.
REPARING THE FRUIT
Bananas must be fully ripe – for maximum sweetness, their skins should be covered with
brown spots.
Peel citrus fruits, separate into segments, and remove seeds.
Remove all traces of pith – it will give your dessert a bitter taste.
If fruit has skin, it must be removed, to avoid blocking the nozzle. The skin on berries is
FROZEN DESSERTS
4

Publicidad

loading