TFA_No. 30.3065_Anleitung
Wireless thermometer
6.2 Reception of outdoor transmitter
• After inserting the batteries the transmitter will automatical-
ly transmit the temperature. The reception symbol will be
flashing on the display.
• If the reception of outdoor temperature fails, "- -" appears
on the display. Check the battery and try it again. Check if
there is any source of interference.
• You can also start the initialization manually. Hold the
°C / °F and HI / LOW button on the base station for five se-
conds at the same time.
• "- -" appears on the outdoor temperature display and the
reception symbol flashes. The base station will scan again
the outdoor temperature.
7. Operation
7.1 Indication of the temperature
• Press the °C / °F button to change between °C (Celsius) or
°F (Fahrenheit) as temperature unit.
7.2 Maximum and minimum values
• There are two memory modes for highest and lowest values.
24
18.01.2018
11:50 Uhr
Seite 13
Wireless thermometer
7.2.1 Maximum and minimum values with manual reset
• As soon as the base station and the outdoor transmitter are
active the maximum and minimum values for indoor and
outdoor will be stored and displayed in the right row.
• Press and hold the HI / LOW button for three seconds, the
values are deleted (display "-") and reset to the actual values.
7.2.2 Maximum and minimum values with auto reset
• Press the HI / LOW button to enter the automatic reset mode
of the maximum-minimum values.
• HI / LOW 24 HR appears on the display.
• The maximum and minimum values will be reset every 24
hours (from the moment of activation).
8. Positioning and mounting of the base station and the
transmitter
• The base station can be placed onto any flat surface (foldout
stand) or wall mounted (mounting hole) at your chosen loca-
tion. Make sure you avoid the vicinity of any source of interfer-
ence such as computer screens, TV sets or solid metal objects.
25