Insert The Batteries - TFA 30.3065 Instrucciones De Uso

TFA_No. 30.3065_Anleitung
Wireless thermometer
5. Elements
5.1 Base station (Receiver)
A: Display (Fig. 1):
A 1: Reception symbol
A 2: Outdoor temperature
A 3: Max/min values
A 4: Indoor temperature
A 5: Indoor humidity
A 6: Auto-reset of the maximum-minimum values
B: Buttons (Fig. 2):
B 1: °C / °F button
B 2: HI / LOW button
C: Housing (Fig. 2):
C 1: Mounting hole
C 2: Battery compartment
C 3: Stand
22
18.01.2018 11:50 Uhr Seite 12
Wireless thermometer
5.2 Transmitter (Fig. 3+4):
D 1: LED signal lamp
D 2: Battery compartment
D 3: Mounting hole
6. Getting started

6.1 Insert the batteries

• Place the instruments on a table at a distance of about 1.5
meters from each other. Avoid being close to possible
sources of interference such as electronic devices and radio
equipment.
• Open the battery compartment of the transmitter and insert
a new battery (1,5 V AA), ensure that battery polarities are
correct. The LED signal lamp flashes.
• Close the battery compartment again.
• Remove the protective film from the base station display.
• Open the battery compartment of the base station.
• Insert a new battery (1,5 V AA), polarity as indicated. All
segments will be displayed briefly. The indoor temperature
and humidity appear on the display.
• Close the battery compartment again.
23