Chicco 00007389100000 Instrucciones De Uso página 24

*60 ml of food in a 150 ml capacity feeding bottle
NOTE: the water quantities to be used for heating, specified above, refer to the Chicco line of feed-
ing bottles and to 80 ml jars. You may use the same quantity of water for feeding bottles of
other brands and jars of different capacities, but pay special attention to the temperature of
the food at the end of the heating cycle (max 37°).
3. Slowly lower into the central body (a) the baby food jar/feeding bottle support (b) and the:
• FEEDING BOTTLE: with the ring and teat properly mounted on the bottle, without adding the little cup.
• BABY FOOD JAR: without the lid or any labels.
WARNING
Milk collection bags, glass feeding bottles, jars and feeding bottles with contents amounting to less
than 150 ml must be placed on the baby food jar/feeding bottle support (b) before being lowered
into the central body (a). This helps provide a better grip and avoids burns.
Make sure that the heating water does not spill from the top of the device and that it does not
reach the mouth of small feeding bottles or jars.
If water spills out of the central body (a) after the feeding bottle has been inserted, immediately dry the
external area and base of the bottle warmer and the power cable and plug with a dry cloth and remove
the excess water from the tank.
4. Insert the plug in the power socket: a long audible signal will be heard.
5. Switch on the interface by touching the on/off touch button (g): an audible signal will be heard
and the indicator lights (i) will begin to blink and turn on in progression.
6. Select the heating mode by touching the selector button (h) repeatedly, as follows:
a. 1 time: for rapid heating - This programme is specifically meant for formula. Indicator light i1 will
begin to blink.
b. 2 times: for slow heating - This programme is specifically meant for breast milk. Indicator light
i2 will begin to blink.
c. 3 times: for baby food heating - This programme is specifically meant for the baby food jar. Indi-
cator light i3 will begin to blink.
7. Initiate the selected heating cycle by touching the on/off touch button (g): an audible signal will be
heard and the indicator light for the given heating mode will remain on continuously to indicate
that the heating cycle is active. After a cycle is selected (point 6), if three minutes pass without
the cycle being activated, the device will switch off automatically.
WARNING
Freezing formula is not advisable.
WARNING
Do not freeze milk in feeding bottles that have a removable base (like the Chicco Perfect5).
WARNING
For milk collection bags, use slow heating mode.
CAUTION
When heating baby food, stir the contents of the jar often to ensure an even temperature.
8. After a few minutes*** of operation the blinking indicator light for the selected function (i) and
the emission of a long audible signal mark the end of the heating cycle.
*** Warning: heating time and the final temperature of the food can vary significantly with the
size and type of container used (plastic feeding bottle, glass feeding bottle, jar, milk collection bag),
quantity of food to be heated, starting temperature (room temperature, refrigerator temperature...),
heating mode selected and consistency of the preparation.
24