Chicco 00007389100000 Instrucciones De Uso página 26

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 55
ABOUT 60
STANDARD
ML*/2 OZ
LARGE NECK
FEEDING
ABOUT 150
BOTTLE
ML/5 OZ
(CAPACITY
ABOUT 250
/FILLING)
ML/9 OZ
ABOUT 60
STANDARD
ML*/2 OZ
SMALL NECK
FEEDING
ABOUT 150
BOTTLE
ML/5 OZ
(CAPACITY
ABOUT 250
/FILLING)
ML/9 OZ
ABOUT 60
ML/2 OZ
MILK COLLEC-
TION BAG
ABOUT 150
(CAPACITY
ML/5 OZ
/FILLING)
ABOUT 250
ML/9 OZ
BABY FOOD JAR
ABOUT 80G
*60 ml of food in a 150 ml capacity feeding bottle
NOTE: The water quantities to be used for heating, specified above, refer to the Chicco line of
feeding bottles and to 80 ml jars. You may use the same quantity of water for feeding
bottles of other brands and jars of different capacities, but pay special attention to the
temperature of the food at the end of the heating cycle (max 37 °C).
4. Move the mechanical switch (l) over the household power supply connector (e) and plug into
the cigarette lighter: an audible signal will be heard and the indicator light next to the power
cable plug (d) will switch on with a red light.
Follow the instructions given in points 5, 6, 7 and 8 of the "USE AT HOME" section.
When using the bottle warmer with the power cable (d) connected to the car's cigarette lighter the
voltage is different from your mains power supply at home, and the heating time may therefore
vary significantly.
9. To switch off the bottle warmer, touch the on/off touch button (g) a second time until the indi-
cator lights (i) switch off and disconnect the bottle warmer power cable plug (d) from the car's
cigarette lighter.
10. Once the bottle or baby food jar has been removed from the bottle warmer tank, dry it thor-
oughly before feeding the baby.
WARNING
Before using the product in a car, always check that the relevant cigar lighter socket is compatible
with the electrical characteristics of the product. Do not use the product with a 24V cigar lighter
socket (e.g.. for heavy-duty vehicles): the product could be irreversibly damaged and cause the
vehicle's electrical system to fail.
CAUTION
Before feeding the heated food to the child, always make sure that the temperature of the food
is not too high.
If the food is not hot enough, keep the feeding bottle or jar in the bottle warmer using "maintain
temperature" mode (see the paragraph titled "Maintain Temperature"). Check the heating status at
30 ml
40 ml
40 ml
50 ml
50 ml
120 ml
50 ml
50 ml
200 ml
30 ml
40 ml
40 ml
50 ml
50 ml
120 ml
60 ml
60 ml
220 ml
/
/
/
/
/
/
/
/
/
/
/
/
26
50 ml
/
/
120 ml
/
/
200 ml
/
/
50 ml
/
/
120 ml
/
/
220 ml
/
/
100 ml
/
/
200 ml
/
/
250 ml
/
/
/
/
150 ml
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
/
150 ml
/

Publicidad

Tabla de contenido
loading

Tabla de contenido