XO XOI21SC Manual De Instrucciones página 14

installation
This type of appliance must be fitted inside a cabinet or inside another type of support
structure. Before proceeding with range hood installation, remove grille D by pressing
the two side buttons A, as shown in figure 1.
Fix the appliance in place using 8 screws (not supplied) which are suited to the type
of cabinet. To install the range hood correctly, first fit the 4 screws A and then the 4
screws B, in accordance with the diagram in figure 2. After fixing the range hood to
the lower part of the cabinet, place grille D back in the correct position. During this
procedure, make sure that grille D is fastened properly.
IMPORTANT - The range hood must be secured to wall studs or use drywall
anchors capable of supporting 75 lbs.
1
2
- 14 -