Dremel 2050 Instrucciones De Funcionamiento página 18

2610Z09741 12-17 2050.qxp_2050 12/19/17 10:39 AM Page 18
Polishing Accessories
These include an impregnated polishing
point and an impregnated polishing wheel for
bringing metal sur faces to smooth finish; a
felt polishing tip and felt polish ing wheel, and
cloth polishing wheel, all used for polishing
plastics, metals, jewelry and small parts. Also
included in this group is a polishing
compound (No. 421) for use with the felt and
cloth polishers.
Polishing points make a very smooth
surface, but a high luster is obtained using
felt or cloth wheels and polishing compound.
For best results polishing accessories
should be used at speeds not greater than
15,000 RPM.
No polishing compound is needed when
using the 425 Polishing Wheel.
Aluminum Oxide Abrasive Wheels
Use to remove paint, deburr metal, polish
stainless steel and other metals. Available in
medium grit. 1/8" shank.
Sanding Accessories
Sanding discs in fine, medium and coarse
grades are made to fit mandrel No. 402 and
EZ407. They can be used for nearly any
small sanding job you might have, from
model making to fine furniture finish ing. In
addition, there is the drum sander, a tiny
drum which fits into the Rotary Tool and
makes it possible to shape wood, smooth
fiberglass, sand inside curves and other diffi -
cult places, and other sanding jobs. You
replace the sanding bands on the drum as
18
Dremel Accessories (Continued)
they become worn and lose their grit. Bands
come in fine medium and coarse grades.
Flapwheels grind and polish flat or contoured
surfaces. They are used most effectively as a
finishing sander after heavier surface
sanding and material removal is completed.
Flapwheels come in fine and coarse grades.
Buffs are a great finishing accessory for
cleaning and light sanding. They work
effectively on metal, glass, wood, aluminum
and plastics. Coarse and medium buffs are
sold together. All buffs are sold individually.
Do not exceed 15,000 RPM in speed. 1/8"
shank.
Grinding Wheel
Use for deburring, removing rust, and general
purpose grinding. Use with Mandrel #402.
Collet Fan
Blows dust away for greater visibility to work
piece. Great for sanding, engraving and
carving. Do not use dust blower to stop or
slow down the tool. Do not contact dust
blower with fingers or workpiece during use.
Dremel Chuck
This chuck allows you to quickly and easily
change accessories on Dremel Rotary Tools
without changing
accessories with 1/32" - 1/8" shank. Read
instruction manual. Insert and securely
tighten the shank of the accessory well within
the jaws of the chuck.
collets. Accepts