Dremel 2050 Instrucciones De Funcionamiento página 19

2610Z09741 12-17 2050.qxp_2050 12/19/17 10:39 AM Page 19
Mandrel No. 401 is used with the felt polishing tip and wheels. Thread the tip on to the screw
carefully. The felt tip must thread down straight on the screw Mandrel, and be turned all the
way to the collar.
Mandrel N° 402 has a small screw at its tip, and is used with sanding discs.
To replace a band on the Drum Sander, loosen
the screw without removing it to contract the
drum then slide the old band off. Slide the new
sanding band on and then expand the drum by
tightening the screw once again.
Replacing Screw Mandrel Accessories
Before each use, check
to make certain that all
components are assembled to accessory
shank and that the drum is sufficiently
expanded to secure the band during use. If
sanding band is loose on the drum during
operation it may "fly" off and strike you or
bystanders.
19