Electrical Connections - Alarms; Electrical Installation Requirements - Brooks Instrument MT36 Serie Manual De Instalación Y Funcionamiento

Section 2 Installation
MT36xx Series
2-8 Electrical Connections - Alarm

2-9 Electrical Installation Requirements

2-4
Refer to Figure 1-7 for internal wiring to terminal strip for reed switch only.
Refer to Figure 1-8 for internal wiring to terminal strip for one reed switch
and one DPDT electromechanical relay.
Refer to Figure 1-9 for internal wiring to terminal strip for two reed switches
and two SPDT electromechanical relays.
Refer to Figures 1-10 and 1-11 for control drawing for IS or Division 2
installations.
Earthing Instruction:
Refer to Figures 1-7 through Figures 1-10.
Supply wiring:
The temperature rating of all wiring must be minimum of 75°C.
Overcurrent Protection:
Installation and Operation Manual
X-VA-MT3600-eng
Part Number: 541B075AAG
March, 2016