Optional Equipment - Brooks Instrument MT36 Serie Manual De Instalación Y Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 51
Installation and Operation Manual
X-VA-MT3600-eng
Part Number: 541B075AAG
March, 2016
Table 1-5 MT36xx Series Optional Equipment Specifications
Optional Equipment t t t t
Optional Equipmen
Optional Equipmen
Optional Equipmen
Optional Equipmen
Alarm Limit Swit
Alarm Limit Swit
Alarm Limit Swit
Alarm Limit Switc c c c c hes
Alarm Limit Swit
hes
hes
hes
hes
Alarm Electrical Classification
Alarm Electrical Classification
Alarm Electrical Classification
Alarm Electrical Classification
Alarm Electrical Classification
Electr
Electr
Electr
Electr
Electromec
omechanical Relay Specifications
omec
omec
omec
hanical Relay Specifications
hanical Relay Specifications
hanical Relay Specifications
hanical Relay Specifications
Reed Switc c c c c h Specifications
Reed Swit
Reed Swit
h Specifications
h Specifications
Reed Swit
Reed Swit
h Specifications
h Specifications
Reed Swit
Reed Swit
Reed Switc c c c c hes Only:
hes Only:
hes Only:
hes Only:
Reed Swit
Reed Swit
hes Only:
Alarm Hyster
Alarm Hyster
Alarm Hysteresis
Alarm Hyster
Alarm Hyster
esis
esis
esis
esis
Alarm Humidity
Alarm Humidity
Alarm Humidity
Alarm Humidity
Alarm Humidity
Ambien
Ambien
t Oper
t Oper
ating
ating T T T T T emper
ating
emper
emper
ature e e e e
atur
atur
Ambient Oper
Ambien
Ambien
t Oper
t Operating
ating
emper
emperatur
atur
Oper
Oper
Oper
Operating Fluid
Oper
ating Fluid T T T T T emper
ating Fluid
ating Fluid
ating Fluid
emper
emperatur
emper
emper
atur
atur
atur
ature Limits
e Limits
e Limits
e Limits
e Limits
Alarm Dimensions
Alarm Dimensions
Alarm Dimensions
Alarm Dimensions
Alarm Dimensions
Con
Contr tr tr tr trol ol ol ol ol V V V V V alves
Con
alves
alves
alves
Con
Con
alves
Flow Con
Flow Con
Flow Contr tr tr tr trollers
Flow Con
Flow Con
ollers
ollers
ollers
ollers
Table 1-6 Hazardous Location Certifications
Model Type : Flame Proof (Exd)
Ambient -29°C to 50°C, IP65, NEMA 4X
Mark
Approvals
Approval Marking
CSA
Class I, Div.1 Group C and D
Class II, Div.1, Groups E, F, and G
Class III, Div. 1
Model Type : Intrinsic safety (ia) / non-sparking (nA) /
Ambient -29°C to 50°C, IP65, NEMA 4X
Mark
Approvals
Approval Marking
CSA
Class I, Division 1, Groups A, B, C, and D; Class II, Division
1, Groups E, F, and G; Class III Hazardous Locations
Class I, Division 2, Groups A, B, C, and D; Class II, Division
2, Groups F and G; Class III Hazardous Locations
Up to two reed switches provide initiation of alarm signal at preset flow values. Settings can be adjusted by removing
the alarm housing cover, loosening, moving and retightening of the reed switch holders, and replacement of the alarm
housing cover. For greater power handling capability, optional electromechanical relays are available.
All alarms are CSA; Canada and USA certified intrinsically safe, explosion-proof or in non-incendive. All alarm
configurations are suitable for indoor and outdoor operation.
Coil operating voltage: 220 or 120 Vac -15% + 10%, 45-60 Hz
Contact rating: 10 amps resistive, 7 amps inductive at 115 Vac
Relay Configuration: Single channel (1) DPDT, Dual Channel (2) SPDT
Voltage: 140 Vac maximum, 50-60 Hz, 200 Vdc maximum
Power: 10 Watts maximum
Current: Determined by calculation so that power does not exceed 10 watts, however the current is never to exceed 0.5 amps.
For Intrinsically safe and explosion proof applications, remotely mounted, switch isolator/power supplies are available
in single channel or dual channel configuration with 110 or 220 Volt supply options. Output is via SPDT relays rated
at 250 Vac, 4A, 24 Vdc, 4A.
Approximately 4 mm (0.16 inch) of float travel
50 - 80% Relative Humidity
-20°F to 122°F (-29°C to 50°C)
-20°F (-29°C) to 250°F (121°C)
See Figures 1-2, 1-5 and 1-6.
Model 3602: Size 8 only, 316 stainless steel material only- on inlet or outlet
Minimum/maximum operating temperature: -20°F (-29°C) to 400°F (204°C)
Cv factor: 1.2
Materials of Construction: 316 stainless steel body and stem, Kel-F
Model MT3602: Size 8 only, 316 stainless steel material only- on inlet or outlet.
Refer to DS-VA-FC-eng for Flow Controller information
Enclosure dust (tc)
Section 1 Introduction
TM
seat, Teflon packing
Certificate/Status
150464-1287562
Certificate/Status
150464-1287562
MT36xx Series
1-3

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Mt3602Mt3601

Tabla de contenido