Unit And Media Care - Panasonic SC-HC49 Instrucciones De Funcionamiento

"ERROR"
≥ Incorrect operation is performed. Read the instructions and try
again.
"F " (" " stands for a number.)
≥ There is a problem with this unit.
Write down the displayed number, disconnect the AC mains lead
and consult your dealer.
"ILLEGAL OPEN"
≥ Sliding door is in the wrong position. Turn the unit off and on
again. If this display appears again, consult the dealer.
"IPOD_DOCK OVER CURRENT ERROR"
"USB OVER CURRENT ERROR"
≥ The iPhone/iPad/iPod is drawing too much power. Disconnect the
iPhone/iPad/iPod and turn the unit off and on again.
≥ The USB device is drawing too much power. Select a source other
than "USB", remove the USB and turn the unit off.
"NODEVICE"
≥ The iPhone/iPad/iPod or USB device is not inserted correctly.
Read the instructions and try again (l 6).
≥ The battery of the iPhone/iPad/iPod is depleted. Charge the
iPhone/iPad/iPod and turn it on before connecting.
"NO DISC"
≥ Insert the disc to be played (l 6).
"NO PLAY"
≥ A CD that is not in CD-DA or MP3 format is inserted. It cannot be
played.
≥ Examine the content. You can only play supported format. (l 16)
≥ The files in the USB device can be corrupted. Format the USB
device and try again.
≥ The unit may have a problem. Turn the unit off and then on again.
"NOT SUPPORTED"
≥ You have connected an iPhone/iPad/iPod that cannot be played
(l 16).
≥ If the iPhone/iPad/iPod is compatible, turn it on and connect it
correctly.
"PLAYERROR"
≥ You played an unsupported MP3 file. The system will skip that
track and play the next one.
"READING"
≥ The unit is checking the CD information. After this display has
disappeared, start operating.
"REMOTE " (" " stands for a number.)
≥ The remote control and this unit are using different codes. Change
the code on the remote control.
– When "REMOTE 1" is displayed, press and hold [OK] and [
for at least 4 seconds.
– When "REMOTE 2" is displayed, press and hold [OK] and [CD/
RADIO] for at least 4 seconds.
"VBR"
≥ The system cannot show the remaining play time for variable bit
rate (VBR) tracks.

Unit and media care

Pull out the AC mains lead from the outlet before
maintenance.
∫ Clean this unit with a soft, dry cloth
≥ When dirt is heavy, wring a wet cloth tightly to wipe the dirt,
and then wipe it with a dry cloth.
≥ When cleaning the speaker covers, use a fine cloth.
Do not use tissues or other materials that can fall apart.
Small pieces may get stuck inside the speaker cover.
≥ Never use alcohol, paint thinner or benzine to clean this unit.
≥ Before using chemically treated cloth, carefully read the
cloth's instructions.
∫ Maintenance of the lens
≥ Clean the lens regularly to prevent malfunctions. Use a dust
blower to remove dust and a cotton swab if it is extremely
dirty.
≥ You cannot use a CD type lens cleaner.
≥ Do not leave the sliding door open for prolonged periods of
time. This will cause the lens to get dirty.
≥ Be careful not to touch the lens with your fingers.
∫ Clean discs
DO
Wipe with a damp cloth and then wipe dry.
∫ Disc handling precautions
≥ Handle discs by the edges to avoid inadvertent scratches or
fingerprints on the disc.
≥ Do not attach labels or stickers to discs.
≥ Do not use record cleaning sprays, benzine, thinner, static
electricity prevention liquids or any other solvent.
≥ Do not use the following discs:
– Discs with exposed adhesive from removed stickers or
labels (rented discs etc.).
– Discs that are badly warped or cracked.
– Irregularly shaped discs, such as heart shapes.
]
∫ To dispose or transfer this unit
The unit may keep the user settings information in the
unit. If you discard this unit either by disposal or
transfer, then follow the procedure to return all the
settings to the factory defaults to delete the user
settings.
(l 13, "To return all settings to the factory defaults")
≥ The operation history may be recorded in the
memory of this unit.
Lens
DO NOT
15
RQT9886