Beta 1498/30A Instrucciones página 18

INSTRUCTIONS FOR USE ISTRUZIONI PER L'USO
INTERRUPTION OF CHARGING CYCLE IN CASE OF A POWER SUPPLY CUT
In the case of a 230V mains power supply cut, the battery charger saves the work cycle it was performing in
order to restore it automatically as soon as the 230V power supply is restored. This feature is fundamental
if the battery charger is used to charge batteries without the operator supervising the cycle; for example,
during very long charging cycles.
END OF CHARGING
1. Once the battery is charged, press the START/STOP key of the battery charger. The LED will turn off to
show that the battery charger has completed the work cycle.
2. Disconnect the power supply lead of the appliance from the mains socket.
3. Disconnect the output lead with the black clamp from the motor vehicle's earthing point or from the negative
terminal (-) of the battery.
4. Disconnect the output lead with the red clamp from the positive terminal (+) of the battery.
After use, replace the battery charger in a dry place free from humidity. To clean the outer casing, use
a dry cloth.
MAINTENANCE
Maintenance and repair jobs must be carried out by trained personnel. For such jobs, you can contact Beta
Untensili S.P.A.'s repair centre.
DISPOSAL
The crossed-out wheelie bin symbol on the equipment or packaging means that the product should be
collected separately from other types of urban waste at the end of its useful life.
Any user who is going to dispose of this tool can:
- deliver it to an appropriate collection facility for electronic or electrotechnical equipment;
- return it to the dealer upon purchase of a new, equivalent item of equipment;
- in case of a product for professional use only, contact the manufacturer which will arrange for the product to
be properly disposed of.
Proper disposal of this product allows the raw materials contained in it to be reused and prevents damage to
the environment or human health.
Illegal disposal of this product is a violation of the provision concerning the disposal of hazardous waste and
will give way to the application of such fines as provided for under current regulations.
WARRANTY
This tool is manufactured and tested in accordance with current EU regulations. It is covered by a 12-month
warranty for professional use or a 24-month warranty for nonprofessional use.
We will repair any breakdowns caused by material or manufacturing defects by fixing the defective pieces or
replacing them at our discretion.
Should assistance be required once or several times during the warranty period, the expiry date of this
warranty will remain unchanged.
This warranty will not cover defects due to wear, misuse or breakdowns caused by blows and/or falls.
In addition, this warranty will no longer be valid if any changes are made, or if the tool is damaged or sent to
the customer service in pieces.
This warranty explicitly excludes any damage to people and/or things, whether direct or consequential.
18
EN I