Initial Configuration; Setting The Time & Date - Conceptronic Home Media Store CH3HNAS Manual De Usuario Ampliado

4.3

Initial configuration

Before you can start using the Home Media Store as a network storage location, some device settings must
be made. These settings are described in the subchapters below.
4.3.1 Setting the time & date
 Select "GENERAL" in the top bar of the configuration page.
 Select "DATE / TIME" in the left bar of the configuration page.
The „DATE / TIME‟ configuration will be shown on your screen:
By default, the Home Media Store will obtain the date & time automatically from the internet by using a
time server, which is listed in the field „NTP server‟.
You can verify if the correct date & time is obtained from the internet in the section „Current date &
time‟.
If the date & time settings are correct, you can proceed to chapter 4.3.2 to change the network
configuration.
ENGLISH
61