Conceptronic Home Media Store CH3HNAS Manual De Usuario Ampliado página 62

ENGLISH
If the date & time are not correct, you can use the settings on this configuration page to modify the date
& time to the correct settings.
 Select if you want to configure the date & time "Manually" or "Automatically".
When you select to configure the date & time "Manually", you need to set the date & time in the
„Current date & time‟ section to the correct values.
 Click "Select" to popup a calendar to select the correct date.
 Use the dropdown menus to select the correct time.
 Click the "Apply" button in the „Current date & time‟ section to save the manual date & time
settings.
When you select to configure the date & time "Automatically", you need to select the correct timezone
from the time zone dropdown menu.
 Set the daylight savings to "Enable", or "Disable", depending on your current daylight savings
condition.
 Select one of the predefined time servers, or add a new time server.
 Click the "Apply" button in the „Change date & time‟ section to save the automatic date & time
settings.
If the date & time settings are correct, you can proceed to chapter 4.3.2 to change the network
configuration.
62