Cosatto ABCs supa 2018 Manual Del Usuario página 7

Fitting & Operation information:
Please refer to the instruction diagrams:
Pushchair 1-
Brake 2-
3-
Front wheel 4-
swivel lock
5-
Handle 6-
7-
Harness 8-
9-
10-
11-
12-
Footmuff 13-
Backrest 14-
15-
Calf support 16-
17-
Basket 18-
Hood 19-
20-
21-
22-
23-
24-
25-
4
Opening:
Release auto lock (1) then pull the handles upwards (2).
Press down on the locking lever (3) until a 'Click' is heard and the secondary
lock bar (4) is locked in place.
Check the chassis has locked in place.
Applying:
Releasing:
Applying:
Releasing:
Raising:
Lowering:
Opening:
Closing:
Adjusting the strap length:
Slide the strap adjustor to suitable length (1, 2 & 3).
Adjusting the shoulder strap position:
Removing:
Push the shoulder strap retainer through the backrest (1).
Push the crotch strap retainer through the seat (2).
Rotate the "C" clip to expose its opening (3) and slide the waist strap out of
clip (4).
Refitting is a reversal of this procedure.
Fitting:
Open the harness (Refer to step 8) and remove chest pad & headhugger (1).
Push the harness straps through the footmuff (2).
Attach the footmuff fabric fasteners to the rear of the backrest (3).
Refit chest pad & headhugger then close the harness.
Lowering:
Raising:
Lowering:
Raising:
Removing:
Refitting is a reversal of this procedure.
Fitting:
Push the brackets onto the mounts on the chassis (1).
Attach the fabric fasteners to the outside of the seat unit (2).
Fit the rear of the hood behind the backrest and attach the fabric fastener (3).
Attach the straps to the front chassis tubing (4).
Opening:
Extending:
Using the viewing window flap:
Using the hood pocket:
Using the multimedia device pocket:
Removing:
Removal is a reversal of step 19.