Cosatto Supa Dupa 3 Manual De Instrucciones página 6

Fitting & Operation information:
Please refer to the instruction diagrams (p. 35 - 40):
Pushchair 1-
Brake 2-
3-
Front wheel swivel 4-
lock
5-
Harness 6-
7-
8-
9-
10-
11-
12-
Footmuff 13-
Backrest 14-
15-
Calf support 16-
17-
Basket 18-
19-
Hood 20-
21-
22-
23-
24-
25-
3
Opening:
Release the auto lock (a) on both sides then pull the handles upward (b).
Press down on the locking lever (c) until a 'Click' is heard and the secondary lock bar
(d) is locked in place.
Check the chassis has locked in place.
Applying:
Releasing:
Applying:
Releasing:
Opening:
Closing:
Adjusting the strap length:
Slide the strap adjustor to suitable length (a, b & c).
Adjusting the shoulder strap position:
Satisfactory shoulder strap position:
Harness tension:
Always make sure that the harness is correctly tensioned to ensure maximum
protection for your child.
You should only be able to insert 2 fingers between the shoulder strap and
waist strap.
NOTE: Winter/ Summer clothing can make a difference to the size of your child.
Removing:
Push the shoulder strap retainer through the backrest (a).
Push the crotch strap retainer through the seat (b).
Rotate the «C» clip to expose its opening (c) and slide the waist strap out of clip (d).
Refitting is a reversal of this procedure.
Fitting:
Open the harness (Refer to step 6) and remove chest pad (a).
Push the harness straps through the footmuff (b).
Attach the footmuff fabric fasteners to the rear of the backrest (c).
Refit chest pads then close the harness.
Lowering:
Raising:
Lowering:
Raising:
Using access zip:
Removing:
Refitting is a reversal of this procedure.
Fitting:
Fit the hood around the middle handle (a).
Push the brackets onto the mounts on the chassis (b).
Attach the fabric fasteners to the outside of the seat unit (c).
Fit the rear of the hood behind the backrest and attach the fabric fastener (d).
Attach the straps to the handle tubing (e).
Opening:
Extending:
Using the viewing window flap:
Using the hood pocket:
Removing: