Storing Stations Manually; Storing Stations Automatically (Travelstore); Scanning Stations; Switching Rds On/Off - Blaupunkt Philadelphia 835 Manual De Instrucciones

Radio mode
Starting station seek tuning
u Press the [
] or [ ] button for approx. 2 seconds
to start station seek tuning.
- or -
u Turn the right rotary control
clockwise to start station seek tuning.
The radio tunes into the next receivable station.
Note:
For the reception area Europe: In the FM waveband,
only traffi c information stations are tuned into if the
priority for traffi c information is switched on.

Storing stations manually

u Select the desired memory bank.
u Set the desired station.
u Press the [
] button.
The menu for storing stations is displayed. 6 memory
locations are available that are displayed as buttons.
u Press the button under which you want to store the
current station.
The station is stored, the radio menu is displayed
again.
Storing stations automatically
(Travelstore)
With Travelstore, you can automatically search for and
store the 6 FM stations off ering the strongest reception
in the region in the memory bank FM1, FM2 or FM3.
u Select an FM memory bank.
u In the radio menu, press the [
u In the options menu, press the Travelstore button.
The tuner starts the automatic station seek tuning.
After the storing is completed, the radio plays the
station at memory location 1 of the previously se-
lected memory bank.
Note:
For the reception area Europe: With switched-on pri-
ority for traffi c information, only traffi c information
stations are stored.

Scanning stations

You can use the scan function to play all the receivable
stations of the current waveband for a few seconds.
u In radio mode, press the [
The seek tuning searches for stations in the current
waveband. Each receivable station is played for a few
seconds in the process.
u Pressing the [
] button again selects the currently
scanned station and plays it back.
30
All manuals and user guides at all-guides.com
6
counter-clockwise or
] button.
] button.

Switching RDS on/off

Many FM stations broadcast an RDS (Radio Data System)
signal in addition to their programme in the reception
area Europe that allows additional functions, such as the
display of the station name.
u In the radio menu, press the [
The options menu is displayed, the current setting is
shown after RDS.
u In the options menu, press the RDS button to change
the setting.
u Press the [
] button.
The radio menu is displayed again.

Switching RDS time signal on/off

The time can be synchronised with the time data trans-
mitted via RDS.
u In the radio menu, press the [
u In the options menu, press the RDS Clock Time but-
ton to change the setting.
u Press the [
] button.
The radio menu is displayed again.

Optimising radio reception

The HICUT function causes a reception improvement in
case of poor radio reception (in FM radio mode only). If
reception interferences exist, the interference level is au-
tomatically decreased.
u In the radio menu, press the [
u In the options menu, press the HICUT button to
change the setting.
u Press the [
] button.
The radio menu is displayed again.
] button.
] button.
] button.