Metra 99-7522B Instrucciones De Instalación página 2

1. Unsnap and remove the trim panel above the glove box
and climate controls. This panel will include the climate
vents and hazard button. (Figure A)
Note: Do not cycle the key while the hazard button is
disconnected.
2. Unsnap and remove the trim from around the factory
radio. (Figure B)
3. Remove (2) Phillips screws, and (1) 10mm bolt securing
the factory radio, then unplug and remove.
Continue to Kit Assembly
2
DASH DISASSEMBLY
(Figure A)
(Figure B)
1.800.221.0932
|
MetraOnline.com