Metra 99-7522B Instrucciones De Instalación página 3

ISO DIN radio provision with pocket
1. Install the (4) included panel clips to the back of the radio
housing.
Note: The factory clips removed in disassembly can also
be used if so desired.
2. Mount the pocket to the radio brackets with (4) #8 x 3/8"
Phillips pan head screws supplied. (Figure A)
3. Attach the completed assembly to the radio housing with
(4) #8 x 3/8" Phillips truss head screws supplied.
(Figure B)
4. Remove the metal "DIN" sleeve and trim ring from the
aftermarket radio.
5. Slide the radio into the completed assembly and secure
with screws supplied with the radio. (Figure C)
6. Locate the factory wiring harness and antenna connector
in the dash and complete all necessary connections to
the radio. Metra recommends using the proper mating
adapter from Metra and/or AXXESS. Test the radio for
proper operation.
7. Reassemble the dash in reverse order of disassembly.
KIT ASSEMBLY
(Figure A)
(Figure B)
(Figure C)
REV. 9/6/2017 INST99-7522B
3