Axxess AXGMLN-01 Instrucciones De Instalación

GM Data Interface
• Provides accessory power (12-volt 10-amp)
• Retains R.A.P. (retained accessory power)
• Provides NAV outputs (parking brake,
reverse, speed sense)
• Pre-wired AXSWC harness (AXSWC sold
separately)
• Retains chimes to the factory speaker
• Adjustable chime level
• AXGMLN-01 interface • AXGMLN-01 harness
• 16-pin harness with stripped leads • Backup camera harness • Antenna adapter
Axxess Integrate
Installation instructions for part AXGMLN-01
AXGMLN-01
2006-Up
INTERFACE FEATURES
• Retains OnStar / OE Bluetooth
• Adjustable OnStar level
• Retains the factory backup camera
• Designed for non-amplified models, or
when bypassing a factory amp
• Retains balance and fade
• Includes an antenna adapter
• AXUSB-CBL updatable (sold separately)
INTERFACE COMPONENTS
APPLICATIONS
See inside front cover
axxessinterfaces.com
Connections to be made ................................................2-3
Installing the AXGMLN-01 ................................................ 3
Initializing the AXGMLN-01 .............................................. 3
Adjusting the AXGMLN-01 ................................................ 4
TOOLS REQUIRED
• Wire cutter • Crimp tool • Solder gun • Tape
• Connectors (example: butt-connectors, bell caps, etc.)
• Small flat-blade screwdriver
CAUTION!
especially air bag indicator lights must be connected before cycling
the ignition. Also, do not remove the factory radio with the key in the
on position, or while the vehicle is running.
•
metraonline.com
Table of Contents
All accessories, switches, climate controls panels, and
© COPYRIGHT 2020 METRA ELECTRONICS CORPORATION