Leuze electronic IPS 208i Manual De Instrucciones página 16

EN
NOTICE
Protective Extra Low Voltage (PELV)!
The device is designed in accordance with protection class III for
supply with PELV (Protective Extra-Low Voltage).
Pin assignment
3
PWR / SWIO, M12 connector, A-coded
Pin No. Designation
1 VIN
2 GND
3 SWI1
4 SWO2
5 FE
6 n.c.
7 SWO5
8 SWO6
9 SWO7
10 SWO8
11 SWI3
12 SWI4
Thread FE (functional earth)
(M12
connector)
NOTICE
The core colors only apply if Leuze's original connection cables are
used (see operating instructions, chapter "Cables accessories").
16
Core color Assignment (default)
Brown +18 ... +30 V DC operating voltage
Blue Negative operating voltage (0 V DC)
White Digital switching input 1
(trigger)
Green Digital switching output 2
(READY)
Pink Functional earth
Yellow Not assigned
Black Digital switching output (-X)
Gray Digital switching output (+X)
Red Digital switching output (-Y)
Violet Digital switching output (+Y)
Gray/pink Digital switching input 3
(program selection 0)
Red/blue Digital switching input 4
(program selection 1)
Connection cable shield.
The shield of the connection cable is
on the thread of the M12 connector.