Publicidad
Idiomas disponibles
Idiomas disponibles
3. Remove (2) Phillips screws securing the
start/stop switch if equipped. (Figure B)
4. Remove (4) Phillips screws securing
the storage pocket, or factory clock if
equipped. (Figure B)
5. Remove the (6) Phillips screws securing
the a/c vents then unclip and remove
them from the radio trim panel.
(Figure B)
6. Unclip and remove the hazard switch.
(Figure B)
Continue to Kit Preparation
DASH DISASSEMBLY
Step 3
Step 6
(Figure B)
(CONT)
Step 5
Step 4
3
REV. 11/21/2017 INST99-7367
Publicidad
