Metra 99-3020 Instrucciones De Instalación página 5

ISO DIN radio provision with pocket
1. Attach the pocket to the radio brackets
using the (4) #8 x 3/8" Phillips screws
provided. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the bracket/pocket
assembly and then secure it using the
screws supplied with the radio.
(Figure B)
4. Attach the assembly to the radio
housing using the (4) #8 x 3/8" Phillips
screws provided. (Figure C)
KIT ASSEMBLY
(Figure A)
(Figure B)
5. Locate the factory wiring harness and
connector in the dash and complete
all necessary connections to the radio.
Metra recommends using the proper
mating adapter from Metra and/
or Axxess. Test the radio for proper
operation.
6. Secure the completed assembly into the
dash using the factory screws.
7. Reassemble the dash in reverse order of
disassembly, using the radio trim panel
instead of the factory panel. (Figure C)
REV. 9/1/2020 INST99-3020
5