Metra 99-6532B Instrucciones De Instalación página 3

ISO DIN radio provision with pocket
1. Attach the (4) supplied white panel
clips to the radio housing.
(Figure A)
2. Attach the pocket to the radio
brackets using (4) supplied
#8 x 3/8" Phillips screws.
(Figure B)
3. Remove the metal "DIN" sleeve and
trim ring from the aftermarket radio.
4. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure C)
Kit Assembly
(Figure A)
(Figure B)
99-6532B
5. Locate the factory wiring harness
and antenna connector in the
dash, and complete all necessary
connections to the radio. Metra
recommends using the proper
mating adapter from Metra and/or
AXXESS. Re-connect the negative
battery terminal and test the radio
for proper operation.
6. Reassemble the dash in the
reverse order of disassembly using
the 99-6532 radio trim panel
instead of the factory radio panel.
3
(Figure C)