Le Chai LBN340 Manual Del Usuario página 81

LB160/LBN160, LB340/LBN340
1 2
1. ON/OFF button
2. & 3. Upper zone temperature setting
4. Temperature display of upper one
POWER
To turn the appliance off, press and hold the key 1 for 5 seconds until temperature display goes out. To
turn the appliance on, press and hold the key 1 for 5 second until temperature display lights up.
NOTE: Pressing the key once can switch off the audible alarm when the alarm is on.
UP
To increase (warm) the set temperature by 1°C or 1ºF.
DOWN
To decrease (cool) the set temperature by 1°C or 1ºF.
LIGHT
Used to turn the inner light on/off.
DISPLAY
Display the digital temperature and service indicators. Part 4 is for the UPPER temperature zone and 5
is for the LOWER temperature zone.
ºF/ºC SELECTOR
Select the temperature display setting in Fahrenheit or Celsius degree. To change the temperature from
Fahrenheit to Celsius or from Celsius to Fahrenheit, press and hold the LIGHT key for 5 seconds.
Setting the Temperature Control
When the unit is plugged in for the first time, the unit will power up automatically to the preset defaults.
The preset temperature at the factory for UPPER temperature zone is 8ºC (46ºF) and for LOWER
temperature zone is 12ºC (54ºF).
You can press the left side UP and DOWN keys to control the internal temperature of the UPPER
temperature zone and press the right side UP and DOWN keys to control the internal temperature of the
LOWER temperature zone. When you press either key at the first time, the display will show the last
temperature set previously.
IMPORTANT: The temperature set for the LOWER temperature zone must always be just as high as or
higher than that in the UPPER temperature zone. For optimal performance, the set temperature of the
two zones should differ by at least 4°C (7ºF).
The temperature that you desire to set will increase 1ºC or 1ºF if you press the UP key once, on the
contrary the temperature will decrease 1ºC or 1ºF if you press the DOWN key once. The display flashes
while you make the setting.
After the temperature has been set, the display shows the current inner temperature of the particular
temperature zone.
3 4 5 6
5. Temperature display of lower one
6. & 7. Lower zone temperature setting
8. Light button
7 8
81