Le Chai LBN340 Manual Del Usuario página 82

To view the set temperature at any time, press the UP or DOWN key, the set temperature will
temporarily flash in the display for 5 seconds. Then the display shows the current inner temperature
again.
TEMPERATURE MEMORY FUNCTION
In the event of a power interruption (power surge, breaker switch, etc.), the unit remembers the previous
temperature settings. When the power is recovered, the cabinet temperature will go back the same
setting temperature as before the power interruption.
TEMPERATURE ALARM
An audible alarm will sound if the temperature in one of the zones rises or falls outside the temperature
range. The relevant temperature display will flash at the same time. The temperature the appliance is set
at determines the temperature the appliance recognizes as being too warm or too cool. The audible
alarm will sound and the temperature display will flash:
- When you switch the appliance on, if the temperature inside the appliance is very different from the
temperature set.
- When there has been a lengthy interruption to the power supply.
- When too many items have been put into the unit at one time. Or too much ambient air flowed in when
rearranging and removing storage items.
- When the door is not been closed tightly.
- The appliance is faulty.
The audible alarm will be automatically silenced and the temperature display stops flashing when the set
temperature is reached again. However, if the noise disturbs you, you can switch the audible alarm off
before this if you wish by pressing the POWER key once. The alarm will stop. The relevant temperature
display continues to flash until the set temperature has been reached. The display then lights up
constantly, and the alarm system is fully active again.
DOOR ALARM
If the door has been left open for more than 60 seconds, the audible alarm will sound. Closing the door
or pressing the POWER key once can switch off the audible alarm.
INTERIOR LIGHT
The interior light makes it easy to view your wine labels and enhances the display of your collection.
Touching the LIGHT mark toggles between 2 modes of operation for the internal lights: functional
(default) mode and showcase mode. If you are in functional (default) mode, the lights will turn on only
when the door is open. If you are in showcase mode, the lights will be on whether or not the door is
open. The unit is equipped with a LED light fitting system. To change the LED light fitting pls contact the
service department.
NOTE: Please use only the original LED light fittings provided by the manufacturer.

Note

If the unit is unplugged, power lost, or turned off, you must wait 3 to 5 minutes before restarting the
unit. If you attempt to restart before this time delay, the Wine cooler will not start.
 When you use the Wine cooler for the first time or restart the Wine cooler after having been shut
off for a long time, there could be a few degrees variance between the temperature you select and
the one indicated on the LED readout. This is normal and it is due to the length of the activation
time. Once the Wine cooler is running for a few hours everything will be back to normal.
82