3M PELTOR WS LiteCom Plus Manual Del Usuario página 11

EN
*1:17 Answer a phone call from the second paired phone
unit during an ongoing call
When a call is active, it is possible to answer an incoming
call from the second paired phone. Answer by a short press
(~0.5 seconds) on the Bluetooth
(fig. 4).
*1:18 Control Bluetooth
®
Play/pause streaming
Short press (~0.5 seconds) the Bluetooth
Skip to next track
Short press (2x~0.5 seconds) the Bluetooth
twice (fig. 4).
Skip to previous track
Rapidly triple press (3x~0.5 seconds) the Bluetooth
(fig. 4).
DID YOU KNOW: Audio playback will be automatically paused
from the audio playback unit when you have a call in progress or
a two-way radio message. After ending the call / message, the
audio playback will automatically start again.
*1:19 Transmitting and receiving messages on a Bluetooth
connected two-way radio
Press the Bluetooth button (fig. 4) to transmit and release to
®
receive messages.
*1:20 Adjust Bluetooth volume (fig. 3)
®
Short press (~0.5 seconds) the [+] or [–] button to adjust the
volume on an active paired Bluetooth
2. CONFIGURING YOUR HEADSET
2:1 Main menu (fig. 8)
To enter the menu, short press (~0.5 seconds) the on/
off/mode button. Use the On/Off/Mode button to navigate
through the menu and the [+] and [–] buttons to adjust the
settings.
After 7 seconds of inactivity, the headset will exit the menu.
These are the options available in the menu:
2:2 Channel
Lists all the programmed channels in the headset, up to 22.
Default: 1
2:3 Radio volume
Adjusts the volume level of the incoming radio sound.
(OFF, 1 – 6) Default: 3
2:4 Ambient listening volume (level-dependent microphones)
Helps protect your hearing from potentially harmful noise levels.
Constant rumbling and other potentially harmful noises are
reduced, but you can still speak normally and make yourself
heard. The ambient listening volume adjusts the level-
dependent function for ambient sound. (OFF, 1 – 6) Default: 3
5
button on the right cup
®
streaming audio (A2DP)
button (fig. 4).
®
button rapidly
®
button
®
device.
®
* Only WS
*2:5 Bluetooth radio, phone or streaming volume
®
Depending on which sound source is connected, you can
adjust the volume on Bluetooth
volume. (OFF, 1 – 6) Default: 3
SMART TIP: When browsing long lists, such as channels, press
and hold either the [+] or [–] button to skip ten items at the time.
2:6 Sub menu (fig. 9)
To enter the sub menu, press (1 second) on both the [+] and
[–] button at the same time. Use the On/Off/Mode button to
navigate through the menu and the [+] and [–] buttons to
adjust the settings.
These are the options available in the sub menu:
2:7 VOX (Voice-operated transmission)
This allows radio transmission without pressing the PTT
button. You can adjust the sensitivity of voice-operated
transmission. ("VOX off" - "VOX low" - "VOX medium" -
"VOX high")
Default: VOX Medium
2:8 Sub channel
Sets the sub channel according to lists (F) and (G) if it is enabled.
-
(OFF, 1 – 121)
®
Default: OFF
2:9 Squelch (hiss reduction)
Squelch means that background hiss in the earphones is
prevented when the incoming signal is below the set squelch
level. ("Squelch off" - "Squelch low" - "Squelch medium" -
"Squelch high")
Default: Squelch medium
2:10 TX power level
This feature controls the power level of the radio transmitter.
There are two output power levels: low and high. The low setting
will reduce the communication range but increase the battery life.
("Power" - "High/low power") Default: Low power
*2:11 Bluetooth pairing (fig. 11)
®
When you hear the voice message "Bluetooth
press (~0.5 seconds) the [+] button to start pairing. Short
press (~0.5 seconds) the Bluetooth
A voice message will confirm, "Bluetooth
Search and select "WS LiteCom Plus" on your Bluetooth
device. A voice message will confirm when pairing is
complete, "Pairing complete" and "Connected". Short press
(~0.5 seconds) the [–] button to stop the pairing. A voice
message will confirm, "pairing failed".
2:12 Language
Adjusts the ghost voice language between all installed
languages. ("English" - "Spanish" - "French" - "German")
Default: English
After 7 seconds of inactivity, the headset will exit the menu
(you can also leave the menu by pressing both the [+] and [–]
button at the same time).
(Bluetooth ) models
TM ®
radio, phone or streaming
®
pairing", short
®
button to stop pairing.
®
pairing on".
®
®