Safety - Fronius MTG 2500 S Manual De Instrucciones

Safety

Safety
Danger due to incorrect operation and incorrectly performed work.
This can result in serious injury and damage to property.
▶
▶
▶
Danger from electric current and risk of injury from the emerging wire electrode.
This can result in serious injury and damage to property.
▶
▶
▶
Danger from electric current.
This can result in serious injury and damage to property.
▶
Risk of burns from hot welding torch components and hot coolant.
This can result in severe scalds.
▶
Risk of damage due to operation without coolant.
This can result in serious damage to property.
▶
▶
Danger from coolant leakage.
This can result in serious injury and damage to property.
▶
24
WARNING!
All the work and functions described in this document must only be carried out by
trained and qualified personnel.
Read and understand this document.
Read and understand all the Operating Instructions for the system components,
especially the safety rules.
WARNING!
Turn the power source mains switch to the "O" position.
Disconnect the power source from the mains.
Ensure that the power source remains disconnected from the mains until all work
has been completed.
WARNING!
All cables, lines and hosepacks must be properly connected, undamaged, correctly
insulated and adequately dimensioned at all times.
CAUTION!
Before commencing any of the work described in these Operating Instructions, allow
all welding torch components and the coolant to cool to room temperature (+25 °C,
+77 °F).
CAUTION!
Never operate a water-cooled welding torch without coolant.
Fronius shall not be liable for any damage resulting from such action. In addition, no
warranty claims will be entertained.
CAUTION!
Seal the coolant hoses on water-cooled welding torches with the plastic stoppers fit-
ted to them if the hoses are detached from the cooling unit or the wirefeeder.