Swing-N-Slide NE 5040 Instrucciones De Ensamblaje página 15

FOR DESIGNS A and D GO TO STEP 8
A
7-1/2''
LADDER
(2) 2'' x 4''
A
ARCH LADDER INSTALLATION CONT.
1. DESIGNS B AND C ONLY: Cut 2'' x 4'' Board(s) to the width of your deck.
2. If your deck is flush with the outside of your uprights, attach 2'' x 4'' Board(s) to uprights as
shown in (Fig. A). If your deck is flush with the inside of your uprights, attach 2'' x 4'' Board to
uprights as shown in (Fig. B).
NOTE: 2'' x 4'' Board(s) and fasteners (for treated wood) Sold Separately.
FOR DESIGNS B AND C ONLY,
(2) 2'' x 4''
STEP 7
B
7-1/4''
LADDER
B
(1) 2'' x 4''
15
(1) 2'' x 4''