Smart Life - App'S User Manual - turbionaire SENSO 20 Manual De Instrucciones

SMART LIFE - APP'S USER MANUAL for SENSO 25 wifi
The "Smart Life" app is available for android and iOS.
Scan with your smartphone to the corresponding QR code to get directly to the download.
How to Use the App
This appliance allows you to operate the appliance via your WIFI home network. A prerequisite is a permanent WIFI
connection to your router and the free app "Smart Life". We recommend disconnecting the appliance from the power
supply when you are away from home to prevent unintentional switching on while you are on the road!
Commissioning via the App
1. Install the "Smart Life" app. Create a user account.
2. Activate the WIFI function in the settings of your appliance.
3. Place the appliance at a distance of about 5 meters to your router.
4. As long as the power is turned on, the WIFI indicator flashes slowly. After 3 minutes, the status will be
canceled if there is no network configuration, and the indicator light is off. If you need to re-connect the WIFI, long-press
the "timer" button for 5 seconds to start the network configuration, the WIFI indicator flashes slowly.
5. When the WIFI indicator flashes slowly, select "Add Device"-"Small Home Appliances"-"Dehumidifier", and
follow the instructions on the display. Select "AP Mode" on the upper right of the app, choose "Confirm indicator slowly
blink" and press "Go to Connect" to connect the WIFI named "SmartLife-XXXX".
6. Once the appliance has been successfully connected, the WIFI lamp lights up. Now you can operate the
appliance using the app.
7. Press and hold the Timer button for about 5 seconds, the appliance disconnect, the WIFI lamp lights off.
TROUBLESHOOTING
Network connection failed
Network connection timeout
WIFI indicator off
The WIFI hotspot disappear and the WIFI
light flash
Solution
1.Check if you select the WIFI named "SmartLife-XXXX".
2.Turn off the machine and unplug the power code and plugin after 10
seconds, enter the App to connect again.
Long press the "Timer" button or Turn off the machine and unplug the
power code and plugin after 10 seconds.
Turn off the machine and unplug the power code and plugin after 10
seconds, enter the App to connect again.
19