Chevrolet Performance SP350 Instrucciones De Instalación

Thank you for choosing Chevrolet Performance as your high performance source. Chevrolet Performance is committed to providing
proven, innovative performance technology that is truly.... more than just power. Chevrolet Performance are engineered, developed
and tested to exceed your expectations for fit and function. Visit our website at
Performance nearest you.
This "SP350 Turn Key Kit" 19351531 documentation should be used in conjunction with the "SP350 Short Block
Specifications" 19172279, "SP350 Engine Specifications" 19351530 and the "Serpentine Belt Accessory Drive Package
Specifications" 12497698. This documentation is included within the information packet, as it builds on the SP350 and
Serpentine Belt Accessory Drive Package. Please locate these documents and start there first.
This publication provides general information on components and procedures that may be useful when installing or servicing a
SP350 Turn Key Engine Kit. Please read this entire publication before starting work. Also, please verify that all of the components
listed in the package contents section below were in fact shipped with the kit.
The information below is divided into the following sections:
 Package contents
Torque specifications
SP350 Turn key Engine Kit assembly specifications
Service parts list
The SP350Turn key Engine Kit includes additional components to the SP350 Crate engine assembly which make up the turn key
kit. Some key items included are the starter, fuel pump, ignition wires and supports, carburetor, filters and bypass hoses. Specific
items and part numbers are listed at the end of these instructions.
It is not the intent of these specifications to replace the comprehensive and detailed service practices explained in the Chevrolet
service manuals.
Observe all safety precautions and warnings in the service manuals when installing the SP350 Turn Key Kit in any vehicle. Wear
eye protection and appropriate protective clothing. Support the vehicle securely with jack stands when working under or around it.
Use only the proper tools. Exercise extreme caution when working with flammable, corrosive, and hazardous liquids and materials.
Some procedures require special equipment and skills. If you don't have the appropriate training, expertise, and tools to perform
any part of this conversion safely, this work should be done by a professional.
The information contained in this publication is presented without any warranty. All the risk for its use is entirely assumed by the
user. Specific component design, mechanical procedures, and the qualification of individual readers are beyond the control of the
publisher, and therefore the publisher disclaims all liability incurred in connection with the use of the information provided in this
publication.
Chevrolet, Chevy, the Chevrolet Bow Tie Emblem, General Motors, and GM are all registered trademarks of General Motors LLC.
SP350 Turn Key Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
SP350TURN KEY ENGINE KIT (19333158) Specifications
Specifications Part Number 19351531
www.chevroletperformance.com
19351531
REV 05JA16
PART NO.
DATE
27AU15 Initial Release - Rusty Sampsel
05JA16 Revision - Jim Covey
for the Chevrolet
1
SHEET
REVISION
12
OF
AUTH
N/A
N/A