Publicidad
Idiomas disponibles
Idiomas disponibles
SP350 Turnkey Engine Specifications:
*Note: The specifications below are in addition to those documented within SP350 Crate Engine and Serpentine Belt Accessory
Drive Package instructions.
Component
Pump, Fuel
Carburetor
Motor, Starter
Wires, Spark Plug
**Information may vary with application. All specifications listed are based on the latest production information available at the time
of printing.
SP350 Turnkey Engine Service Parts List - See Package Contents
SP350 Turn Key Kit
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
Characteristics
Heavy duty mechanical fuel pump. This high capacity pump
has a removable lower housing that can be rotated to position
the inlet and outlet as required by the chassis and plumbing.
Vacuum secondary, automatic electric choke, dual feed center
hung fuel bowls. Includes gasket, mounting studs and nuts.
Lightweight high performance starter originally used on Camaro
Z28 LT-1. Can be used on any big or small block Chevy V8
WITH 12 ¾" (153 tooth) flywheel.
Performance spark plug wire set, with 90º spark plug boots.
19351531
REV 05JA16
PART NO.
DATE
27AU15
Initial Release - Rusty Sampsel
05JA16
Revision - Jim Covey
4
SHEET
REVISION
12
OF
AUTH
N/A
N/A
Publicidad
