Chevrolet Performance LT1 Manual Del Usario

Thank you for choosing Chevrolet Performance Parts as your high performance source. Chevrolet Performance Parts is committed
to providing proven, innovative performance technology that is truly.... more than just power. Chevrolet Performance Parts are
engineered, developed and tested to exceed your expectations for fit and function. Please refer to our catalog for the Chevrolet
Performance Parts Authorized Center nearest you or visit our website at www.chevroletperformance.com.
This publication provides general information on components and procedures which may be useful when installing or servicing
your crate engine. Please read this entire publication before starting work.
This crate engine is assembled using brand new, premium quality components. It is based off of the Chevrolet Generation V LT1
Series architecture, and utilize such modern technologies as individual ignition coil per cylinder and direct fuel injection. Due to
the wide range of small block applications, if you are retrofitting a previous small block application, you may encounter installation
differences between your crate engine assembly and the previous version. These differences may require modifications or
additional components not included with the engine, including cooling, fuel, electrical, and exhaust systems. Some fabrication work
may be required.
The LT1 crate engine require an engine control system which is available from your Chevrolet Performance Parts dealer. Check
with your dealer or on www.chevroletperformance.com for the control system packages that are currently available. It is not the
intent of these specifications to replace the comprehensive and detailed service practices explained in the Chevrolet service
manuals. For information about warranty coverage, please contact your local Chevrolet Performance Parts dealer.
Observe all safety precautions and warnings in the service manuals when installing a crate engine in any vehicle. Wear eye
protection and appropriate protective clothing. When working under or around the vehicle support it securely with jack stands. Use
only the proper tools. Exercise extreme caution when working with flammable, corrosive, and hazardous liquids and materials.
Some procedures require special equipment and skills. If you do not have the appropriate training, expertise, and tools to perform
any part of this conversion safely, this work should be done by a professional. This publication is intended to provide information
about this crate engine and related components. This manual also describes procedures and modifications that may be useful
during the installation of an LT1 crate engine system. It is not intended to replace the comprehensive service manuals and parts
catalogs which cover Chevrolet Performance engines and components. Rather, it is designed to provide supplemental information
in areas of interest to "do-it-yourself" enthusiasts and mechanics.
This publication pertains to engines and vehicles which are used off the public highways except where specifically noted otherwise.
Legal and Emissions Information
Federal law restricts the removal of any part of a federally required emission control system on motor
vehicles. Further, many states have enacted laws which prohibit tampering with or modifying any required
emission or noise control system. Vehicles which are not operated on public highways are generally
exempt from most regulations, as are some special interest and pre-emission vehicles. The reader is
strongly urged to check all applicable local and state laws. Many of the parts described or listed in this
manual are merchandised for off-highway application only, and are tagged with the "Special Parts Notice"
reproduced here:
Special Parts Notice
This part has been specifically designed for Off-Highway application only. Since the installation of this part
may either impair your vehicle's emission control performance or be uncertified under current Motor Vehicle
Safety Standards, it should not be installed in a vehicle used on any street or highway. Additionally, any such
application could adversely affect the warranty coverage of such an on-street or highway vehicle.
Performance Crate Engine
TITLE
ALL INFORMATION WITHIN ABOVE BORDER TO BE PRINTED EXACTLY AS SHOWN ON 8 1/2 x 11
WHITE 16 POUND BOND PAPER. PRINT ON BOTH SIDES, EXCLUDING TEMPLATES.
TO BE UNITIZED IN ACCORDANCE WITH GM SPECIFICATIONS.
LT1 Performance Crate Engine
IR 02MY18
DATE
02MY18 Initial Release - Rocko Parker
19416593
PART NO.
REVISION
1 27
SHEET OF
AUTH
N/A