Using On-Screen Menus; Operating Through Menus; Menu Guide - Sony FWD-40LX1 Manual De Instrucciones

Using On-screen Menus

Using On-screen Menus

Operating Through Menus

Menu operating buttons
Use the buttons on the display unit or the Remote
Commander for menu operations.
Remote Commander
MENU
ENTER
Operation of the unit is explained in these operating
instructions for the case of operation using the Remote
Commander. The M/m and ENTER buttons on the
Remote Commander have the same functions as the
M/m and ENTER buttons on the display.
Note
Operation may differ in some cases since there is no
</, button on the display.
Configuration of the menu
To select the language of the menus, see "Selecting the On-
screen Language" on page 36 (GB).
1
Press MENU.
The main menu appears on the screen.
PICTURE/SOUND CONTROL
Picture Mode: Vivid
Adjust Picture
Adjust Sound
Select Set ENTER
2
Press M/m to move the cursor (yellow) to the main
menu items you want to select and press ENTER.
The cursor moves to the next menu.
16
(GB)
Control button section
Exit MENU
3
Press M/m to move the cursor (yellow) to the item
you want to select and press ENTER.
The menu for the selected item appears.
Select an different item by repeating this
procedure.
4
Press M/m to adjust or select the setting and press
ENTER to set it.
The setting is registered and the menu returns to
the previous menu.
To complete the configuration and return to the
normal screen, press MENU.
To return to the previous menu level, press M/m to
and press ENTER or <.
move the cursor to

Menu Guide

Note
Items that cannot be set or adjusted (depending on the
setting or the type of signal input) show in gray.
PICTURE/SOUND CONTROL
menu
Adjusts the quality of sound and picture.
PICTURE/SOUND CONTROL
Picture Mode: Vivid
Adjust Picture
Adjust Sound
Select Set
ENTER
Picture Mode
Sets the image quality suitable for the type of picture
or the brightness of the location where the unit is
installed.
For details, see "Selecting Image Quality" on page 24
(GB).
Adjust Picture
You can make fine adjustment of the picture.
Set Picture Mode to any of "User1" to "User3" first.
Note
You cannot adjust the following items when Picture
Mode is set to "Vivid" or "Standard."
For details, see "Adjusting the Picture" on page 24 (GB).
Exit
MENU