Cruising In Other Conditions; Cruising In Salt Water; Cruising In Turbid Water - Yamaha 225G Manual Del Propietário

EMU00303
PROCEDURE FOR TILTING DOWN
Power trim/tilt model
1) Push the power trim/tilt switch "UP"
until the engine is supported by the
tilt rod.
2) Release the tilt-support lever.
3) Push the power trim/tilt switch "DN"
(Down) to lower the engine to the
411021
desired position.
EMH60010
OTHER CONDITIONS

CRUISING IN SALT WATER

After operating in salt water, wash out the
cooling-water passages with fresh water
to prevent them from becoming clogged-
up with salt deposits
NOTE
Refer to cooling system flushing instruc-
tions in TRANSPORTING AND STORING
OUTBOARD MOTOR.

CRUISING IN TURBID WATER

It is strongly recommended that the
optional chromium-plated water-pump kit
be installed if the outboard is to be used
in turbid (muddy) water conditions.
3-22
CRUISING IN
GB