Installing The Guard; Installing The Edge Guard - Toro 51834 Manual Del Propietário

3

Installing the Guard

Parts needed for this procedure:
1 Guard
Procedure
1. Remove the 2 socket head screws, 2 washers, and 2 spacers from the trimmer base (A of
2. Align the guard onto the trimmer base (B of
3. Secure the guard onto the base of the trimmer with the 2 socket head screws, 2 washers, and 2 spacers
previously removed (C of
4

Installing the Edge Guard

Parts needed for this procedure:
1 Wire edge guard
Procedure
Slightly spread the ends of the wire edge guard apart
and then insert the ends into the holes in the trimmer
housing as shown in Figure
Figure
Figure 3).
4.
3).
Figure 3
10
Figure
Figure 4
3).
g333607
g333376