Installing The Guard - Toro Flex-Force Power System 60V MAX Manual De Instrucciones

3

Installing the Guard

Parts needed for this procedure:
1 Guard
Procedure
1. Using the provided Allen wrench, remove the 2 socket head screws, 2 washers, and 2 spacers from the
trimmer base (A of
2. Align the guard onto the trimmer base (B of
3. Secure the guard onto the base of the trimmer with the 2 socket head screws, 2 washers, and 2 spacers
previously removed (C of
Figure 3).
Figure 2).
Figure 3).
Figure 3
9
g293134