Installing The Guard; Installing The Edge Guard - Toro 51484 Manual Del Usuario

2

Installing the Guard

Parts needed for this procedure:
1 Guard
1 Phillips screw
Procedure
1. Remove the Phillips screw that is taped to the guard
2).
2. Slide the guard onto the trimmer base as shown in
1. Phillips screw
3. Secure the guard using a Phillips screw.
Figure 2
2. Guard
3

Installing the Edge Guard

Parts needed for this procedure:
1 Wire edge guard
Procedure
Insert the ends of the wire edge guard into the holes in the trimmer
housing as shown in
(Figure
Figure 2.
g017506
1. Wire edge guard
6
Figure 3.
Figure 3
g017642